[Matty 2Honx]

so today i checked my oil in my car and realized there was a little bit of water in my oil when i popped a breather off.then i pulled my dipstick and no signes of water there but only where my valve covers are is it a intake leak or head gaskets tell me wat u think??

 

[gigglegas]

so you pulled the dipstick and there was no oil? not good

 

[Matty 2Honx]

no theres oil just no signes of water

 

[94ltz]

Well some water is probably condensation but if you really want to know drain the oil.. Are you hearing some internal noise or just noticed this stuff?

 

[gigglegas]

oh well it says u pulled the dipstick and no signs of oil

 

[Matty 2Honx]

yea no noises just water

 

[Matty 2Honx]

yea i meant water i fixed the post

 

[1bad4dr]

Likely just condensation.

 

[Matty 2Honx]

Likely just condensation.

ill take some pictures of it tomorrow with the valve covers off ive drained the oil once before when i saw that thinking the same thing but im not sure now

 

[gsmopar]

Why would you have condensation in your valve covers? What type of breather/vent are you using? Yes, post pics!

 

[1bad4dr]

ill take some pictures of it tomorrow with the valve covers off ive drained the oil once before when i saw that thinking the same thing but im not sure now

My question is, "Have you ever had a radiator hose burst which exposed your breather to water?" Do you hose down the engine bay to clean?

How much water are you talking about?

You never mentioned that this has happened in the past.

 

[Matty 2Honx]

i just put some pics up..never had a hose burst and havent cleaned the engine bay..

 

[1bad4dr]

Holy shit.

Awaiting for your answers to my questions, but I would start by removing the intake and see if the problem is there. If not, then the heads...

Is it just the one side, or do you have that brownie mix on both sides?

 

[turbob13]

you got the poo all over

 

[Matty 2Honx]

yea its on both sides and it did happen once before then i changed the oil thinking it was condensation

 

[472BigBlock]

I say head gasket of cracked block. That is alot of water! you should not have chocolate mile in your motor.

 

[Matty 2Honx]

I say head gasket of cracked block. That is alot of water! you should not have chocolate mile in your motor.

see thats wat i dont get tho i pull my dipstick and it fine no milky

 

[Project T/A]

hey were you there when i pulled the drain plug out of my 301??? a bunch of water came out before the oil. pull your plug change the oil. watch when you pull it though and see if water comes out first. oil floats on water.

 

[01ws6]

change the oil run it then change it again if you still got water in there you got a problem

 

[94ltz]

damn that is alot of milk.. Like stated before change the oil and see if water runs out first.