True Street Car Forums banner
1 - 3 of 3 Posts

·
9 Second Street Machine
Joined
·
5,127 Posts
Discussion Starter · #1 ·
Small Block Chevy with a big cam. Right near 700 lift with the 1.6 ratio rockers. Does anyone have any experience with this. I put a $29.00 pair of SBC valve covers to clear the stud girdle. Maybe the cheapo valve covers?
 

·
Registered
Joined
·
100 Posts
Small Block Chevy with a big cam. Right near 700 lift with the 1.6 ratio rockers. Does anyone have any experience with this. I put a $29.00 pair of SBC valve covers to clear the stud girdle. Maybe the cheapo valve covers?
I've got valve cover spacers I'd sell for $25.00 plus the bus ride.
OR
use a ball pean hammer to clearance the covers !
 

·
Registered
Joined
·
706 Posts
Small Block Chevy with a big cam. Right near 700 lift with the 1.6 ratio rockers. Does anyone have any experience with this. I put a $29.00 pair of SBC valve covers to clear the stud girdle. Maybe the cheapo valve covers?
If you already have the 'tall' valve covers, just use the thick cork gaskets, Felpro and Mr. Gasket both make them, I have to use them to clear my stud girdle also. Try Mr. Gasket 5861.
 
1 - 3 of 3 Posts
Top