True Street Car Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
376 Posts
Discussion Starter · #1 ·
I have a complete 10second turbo 91' Mustang GT Saleen clone I'm parting out. Some of the parts are already accounted for but there is still ALOT left including the actual car as a roller. The car is actually a clone of my Saleen race car. Items left include a built 8.8 rearend with 31 spline axles and a spool. A complete C4 transmission package (manual valve body, 3500 stall) that includes EVERTHING to install in a Fox Mustang. MSD Billet distributor for carb applications (302). Motorsport tall polished valve covers. Stage 2 turbo kit from Pony Down Performance with brand new T66 turbo and large front mount intercooler. CSU blow thru carb (750) CSU carb bonnet. Aeromotive by pass regulator. Msd 6AL BTM. Milodon 7 qt oil pan. 306 short block with forged pistons and rod bolts. Custom turbo cam (spec available to buyer) Weld Drag lite wheels with new slicks. Plus alot more im forgeting. The car itself is white with the same Saleen graphics as my race car. It has a 5 inch cowl hood, Saleen wing and LX taillights. It has a very clean grey interior with a 4 point roll bar and dual 5 point harnesses. It has a fuel cell and battery relocation with battery shut off switch. Weld in sub frame connectors. Rear anti roll bar. Also has rear upper and lower control arms. Currently sitting on Weld wheels with new slicks. A more complete list with prices will follow shortly. If you see something you want please call me ASAP. This is gonna go fast! Thanks, Anthony 328-2731
 

·
Premium Member
Joined
·
1,746 Posts
What do you want for just the engine, carb, turbo n kit with fuel system???


I have a complete 10second turbo 91' Mustang GT Saleen clone I'm parting out. Some of the parts are already accounted for but there is still ALOT left including the actual car as a roller. The car is actually a clone of my Saleen race car. Items left include a built 8.8 rearend with 31 spline axles and a spool. A complete C4 transmission package (manual valve body, 3500 stall) that includes EVERTHING to install in a Fox Mustang. MSD Billet distributor for carb applications (302). Motorsport tall polished valve covers. Stage 2 turbo kit from Pony Down Performance with brand new T66 turbo and large front mount intercooler. CSU blow thru carb (750) CSU carb bonnet. Aeromotive by pass regulator. Msd 6AL BTM. Milodon 7 qt oil pan. 306 short block with forged pistons and rod bolts. Custom turbo cam (spec available to buyer) Weld Drag lite wheels with new slicks. Plus alot more im forgeting. The car itself is white with the same Saleen graphics as my race car. It has a 5 inch cowl hood, Saleen wing and LX taillights. It has a very clean grey interior with a 4 point roll bar and dual 5 point harnesses. It has a fuel cell and battery relocation with battery shut off switch. Weld in sub frame connectors. Rear anti roll bar. Also has rear upper and lower control arms. Currently sitting on Weld wheels with new slicks. A more complete list with prices will follow shortly. If you see something you want please call me ASAP. This is gonna go fast! Thanks, Anthony 328-2731
 

·
3rd Gear
Joined
·
1,124 Posts
how much u want for the turbo kit and would u be willing to trade anything?
 

·
FUCK FOURLOKO!!
Joined
·
10,258 Posts
Give me a price on those valve covers Anthony.. They would look way better on my car than what I have.
 

·
Registered
Joined
·
376 Posts
Discussion Starter · #7 ·
Everything is gonna go for around half of new. Ill be ready to start the sales this next week. Thanks for the interest, Anthony
 

·
E85 veteran
Joined
·
2,739 Posts
Everything is gonna go for around half of new. Ill be ready to start the sales this next week. Thanks for the interest, Anthony
I though it over last night and I am 95% sure I will take the tranny setup. Let me know when you got it available.
 

·
TSC Resident UltiTroll
Joined
·
11,202 Posts
Could I get a price on that wastegate and your aeromotive pump + filter?
 
1 - 9 of 9 Posts
Top