Get a good methanol system and run that to and you'll be fine. Some people mix it with water some run it 100%.
L98 383 Stroker build 10 psi
Hey so this is my first build and I'm trying to do it right the first time.
I'm building a 383 stroker for my 1986 Z28. Heres what I have
L98 block bored .030 over
Stroker assembly from enginekits.com
crank stroke 3.75
5.7 forged rods
12cc dished pistons
splayed main caps
novi 1000 with 10-11lbs pulley
1.6 crane gold rockers
hardened pushrods (stock length)
So with 64cc chambers the compression ratio should be 10.2:1 :yikes:
I know thats way too high to run 10psi so I want to know what size chambers should I be looking for 68cc, 72cc or..... size runners 190cc or 210cc?
Also what size cam? I want it to be a hydraulic roller cam.
I was thinking and airgap intake
btw it is a carbed motor. Unsure on carb setup aswell.
All help would be really appreciated. :beer:
I'm building a 383 stroker for my 1986 Z28. Heres what I have
L98 block bored .030 over
Stroker assembly from enginekits.com
crank stroke 3.75
5.7 forged rods
12cc dished pistons
splayed main caps
novi 1000 with 10-11lbs pulley
1.6 crane gold rockers
hardened pushrods (stock length)
So with 64cc chambers the compression ratio should be 10.2:1 :yikes:
I know thats way too high to run 10psi so I want to know what size chambers should I be looking for 68cc, 72cc or..... size runners 190cc or 210cc?
Also what size cam? I want it to be a hydraulic roller cam.
I was thinking and airgap intake
btw it is a carbed motor. Unsure on carb setup aswell.
All help would be really appreciated. :beer:
1 - 1 of 21 Posts
1 - 1 of 21 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
True Street Cars Forums
A forum community dedicated to street car owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
