True Street Cars Forums banner
1 - 10 of 10 Posts

· TSC ******
Joined
·
720 Posts
Discussion Starter · #1 ·
Ok, so I want to put an amp and subs in my 04 TSX. The trick is I still have the factory stereo, so I bought this RCA ground loop isolator from the audio store cause the guy there told me it was all I need to hook up the amp. So I wire everything in turn on the car and i get power to the amp but no sound out of the subs??? Im not sure if i wired something in wrong or if the isolator is bad. Any help would be great!!

Pic of the RCA ground loop isolator:
 

· زنجي الر
Joined
·
3,362 Posts

· TSC ******
Joined
·
720 Posts
Discussion Starter · #5 ·
what wires did you hook up the isolator to? THey should go to one of your speakers, 1 neg and 1 pos
Yeah thats how I hooked it up.

Ground loop isolator is to help get rid of the extra noise from something not being grounded. Some aftermarket stereos due this and it is a whine when the engine spins faster (from the alternator). What you need is a line output converter like this one:

Scosche - 2-Channel Adjustable Line-Out Converter - Clear - LOC80
So the one I have is not the one? I thought it would be cause it has the RCA jacks.
 

· Titan Killer/ Creeper
Joined
·
5,884 Posts
Well that blows.. guess its off to best buy.... One thing thought, the one from best buy has a few more wires. Do those all have to be hooked up to something?
it should have 5 wires 1 negative, I set of positive/negative for left and 1 for the right
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top