True Street Cars Forums banner
1 - 20 of 89 Posts

· GOT DA BUSA!!!
Joined
·
673 Posts
Discussion Starter · #1 ·
Open invitation to anyone who wants to join me at the track on the 24th!! I'm gonna take the Busa out for it's maiden voyage that day and I wouldn't mind if some of the other bikers came out to watch/give me some pointers. Let me know if you're in. See you there!!!
 

· Registered
Joined
·
1,685 Posts
I'll be there for you to listen to my ass fart......I mean give you my opinions....
:headbang:

You should do well as you have lots of experience from your old GSXRrrrrr days....the stock Busa clutch is a bitch.....
 

· GOT DA BUSA!!!
Joined
·
673 Posts
Discussion Starter · #3 ·
the stock Busa clutch is a bitch.....
So I've heard. I wonder if I'll be able to slip it at all or if it's just gonna act like a damn light switch. We'll see...
 

· Registered
Joined
·
1,685 Posts
So I've heard. I wonder if I'll be able to slip it at all or if it's just gonna act like a damn light switch. We'll see...
The first few runs should be ok but after awhile the clutch point gets a bit grabby. Sean didn't seem to have a whole lot of issues on his but I was wondering if it had any clutch mods before he switched to his current setup?

All I know is that on both my 01 and the current bike as well as the half of dozen Busas I rode or raced, the clutch system is not even half the clutch the ZX14 uses.

If you can get a decent 60ft, 10.80s should be close.
 

· Mah Stacy Adams!
Joined
·
3,878 Posts
come out to the call out meet on the 18th man, there are going to be lots of bikes and cars out there to race.
 
G

·
The first few runs should be ok but after awhile the clutch point gets a bit grabby. Sean didn't seem to have a whole lot of issues on his but I was wondering if it had any clutch mods before he switched to his current setup?

All I know is that on both my 01 and the current bike as well as the half of dozen Busas I rode or raced, the clutch system is not even half the clutch the ZX14 uses.

If you can get a decent 60ft, 10.80s should be close.
its in the hand lol
 

· Praying for TSC
Joined
·
580 Posts
Expect low 1.8 60' at best if you're stock clutch/gearing. Old gixer's are very easy to launch. Busa's = no forgiveness at all. Right ICBN? :seeya:
 

· Mah Stacy Adams!
Joined
·
3,878 Posts
Expect low 1.8 60' at best if you're stock clutch/gearing. Old gixer's are very easy to launch. Busa's = no forgiveness at all. Right ICBN? :seeya:
at 220 pounds with stock gearing and little seat time i would be suprised if he hits below 1.95
 

· Registered
Joined
·
1,685 Posts
at 220 pounds with stock gearing and little seat time i would be suprised if he hits below 1.95
He is slightly lower than stock so he should be able to launch it fairly hard. With me at 280lbs suited, I ran a best of 10.86ET with the same position as BAFRAID's. That 60ft. was a lousy 1.90 but I have gotten a 1.80 at the same setting. I got WOT better on the 1.90 than the 1.80. So a 10 is not going to be impossible whatsoever.

To date the bike is slammed and the best 60ft. is still a straight 1.70. Trying to get a 1.65 this next time around but it will be hard.
 

· Mah Stacy Adams!
Joined
·
3,878 Posts
im not saying he wont light a 10 but i was saying the '60 is going to be the hard part.

hell its a buzza, those beat zx14s all the time. am i right or am i right?
 

· Registered
Joined
·
1,685 Posts
im not saying he wont light a 10 but i was saying the '60 is going to be the hard part.

hell its a buzza, those beat zx14s all the time. am i right or am i right?
ha...ha...ha

Your right. It won't happen immediately but with some practice and some tips from a few of us, I believe he will light a 10 that same day. BAFRAID can launch and has wheelie skills so he won't be afraid tp push it. :lol:
 
1 - 20 of 89 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top